View TLE2037CDG4_9081033.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

tle2027, tle2037, tle2027a, tle2037a, tle2027y, tle2037y excalibur low-noise high-speed precision operational amplifiers slos192c ? february 1997 ? revised april 2010 1 outstanding combination of dc precision and ac performance: unity-gain bandwidt h...15 mhz typ v n 3.3 nv/ hz at f = 10 hz typ, . . . . . 2.5 nv/ hz at f = 1 khz typ v io 25 v max . . . . a vd 45 v/ v typ with r l = 2 k , . . . . 19 v/ v typ with r l = 600 available in standard-pinout small-outline package output features saturation recovery circuitry macromodels and statistical information description the tle20x7 and tle20x7a contain innovative circuit design expertise and high-quality process control techniques to produce a level of ac performance and dc precision previously unavail- able in single operational amplifiers. manufac- tured using texas instruments state-of-the-art excalibur process, these devices allow upgrades to systems that use lower-precision devices. in the area of dc precision, the tle20x7 and tle20x7a offer maximum offset voltages of 100 v and 25 v, respectively, common-mode rejection ratio of 131 db (typ), supply voltage rejection ratio of 144 db (typ), and dc gain of 45 v/ v (typ). available options packaged devices chip t a v io max at 25 c small outline ? (d) chip carrier (fk) ceramic dip (jg) plastic dip (p) chip form ? (y) 0 c to 70 c 25 v tle2027acd tle2037acd ? ? ? ? tle2027acp tle2037acp tle2027y tle2037y 0 c to 70 c 100 v tle2027cd tle2037cd ? ? ? ? tle2027cp tle2037cp tle2027y tle2037y 40 c to 105 c 25 v tle2027aid tle2037aid ? ? ? ? tle2027aip tle2037aip ? ? 40 c to 105 c 100 v tle2027id tle2037id ? ? ? ? tle2027ip tle2037ip ? 55 c to 125 c 25 v tle2027amd tle2037amd tle2027amfk tle2037amfk tle2027amjg tle2037amjg tle2027amp tle2037amp ? ? 55 c to 125 c 100 v tle2027md tle2037md tle2027mfk tle2037mfk tle2027mjg tle2037mjg tle2027mp tle2037mp ? ? the d packages are available taped and reeled. add r suffix to device type (e.g., tle2027acdr). ? chip forms are tested at 25 c only. copyright ? 2002 ? 2006, texas instruments incorporated production data information is current as of publication date. products conform to specifications per the terms of texas instruments standard warranty. production processing does not necessarily include testing of all parameters. please be aware that an important notice concerning avail ability, standard warranty, and use in critical applications of texas instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. all trademarks are the property of their respective owners. www.ti.com 1 2 3 4 8 7 6 5 offset n1 in ? in + v cc ? offset n2 v cc + out nc d, jg, or p package (top view) 3 2 1 20 19 910111213 4 5 6 7 8 18 17 16 15 14 nc v cc + nc out nc nc in ? nc in + nc fk package (top view) nc offset n1 nc nc nc nc nc nc offset n2 cc ? v
tle2027, tle2037, tle2027a, tle2037a, tle2027y, tle2037y excalibur low-noise high-speed precision operational amplifiers slos192c ? february 1997 ? revised april 2010 2 post office box 655303 ? dallas, texas 75265 post office box 1443 ? houston, texas 77251 ? 1443 description (continued) the ac performance of the tle2027 and tle2037 is highlighted by a typical unity-gain bandwidth specification of 15 mhz, 55 of phase margin, and noise voltage specifications of 3.3 nv/ hz and 2.5 nv/ hz at frequencies of 10 hz and 1 khz respectively. the tle2037 and tle2037a have been decompensated for faster slew rate ( ? 7.5 v/ s, typical) and wider bandwidth (50 mhz). to ensure stability, the tle2037 and tle2037a should be operated with a closed-loop gain of 5 or greater. both the tle20x7 and tle20x7a are available in a wide variety of packages, including the industry-standard 8-pin small-outline version for high-density system applications. the c-suffix devices are characterized for operation from 0 c to 70 c. the i-suffix devices are characterized for operation from ? 40 c to 105 c. the m-suffix devices are characterized for operation over the full military temperature range of ? 55 c to 125 c. symbol out offset n2 in ? in + offset n1 ? +
tle2027, tle2037, tle2027a, tle2037a, tle2027y, tle2037y excalibur low-noise high-speed precision operational amplifiers slos192c ? february 1997 ? revised april 2010 3 tle202xy chip information this chip, when properly assembled, displays characteristics similar to the tle202xc. thermal compression or ultrasonic bonding may be used on the doped-aluminum bonding pads. the chip may be mounted with conductive epoxy or a gold-silicon preform. bonding pad assignments chip thickness: 15 mils typical bonding pads: 4 4 mils minimum t j max = 150 c tolerances are 10%. all dimensions are in mils. pin (4) is internally connected to backside of chip. (1) (2) (3) (4) (5) (6) (7) (8) 90 73 (1) (2) (3) (4) (6) (7) (8) + ? out in + in ? v cc+ v cc ? offset n1 offset n2 (1) (3) (2) (8) (7) (4) (6)
slos192c ? february 1997 ? revised april 2010 4 www.ti.c om equivalent schematic in ? in + r24 r26 q57 q56 q55 q60 out q62 q59 q61 q58 r25 q48 q54 q53 q52 q49 q50 r23 r22 r21 r20 q46 q42 r19 q47 q44 q43 q40 q45 q41 q39 q38 q37 q35 r15 q36 r16 r17 c4 c3 r13 q34 q33 q32 r9 q27 q30 r8 r11 q25 q28 c2 q31 q26 q29 r18 r14 r12 r10 r7 q19 c1 q24 q23 q20 r6 r3 q21 q22 q16 q15 q18 r5 r4 q13 q14 q17 r2 r1 offset n2 offset n1 q12 q10 q9 q11 q8 q7 q5 q6 q4 q1 q3 q2 q51 cc v cc+ v ? actual device component count component tle2027 tle2037 transistors 61 61 resistors 26 26 epifet 1 1 capacitors 4 4
tle2027, tle2037, tle2027a, tle2037a, tle2027y, tle2037y excalibur low-noise high-speed precision operational amplifiers slos192c ? february 1997 ? revised april 2010 5 www.ti.com absolute maximum ratings over operating free-air temperature range (unless otherwise noted) ? supply voltage, v cc+ (see note 1) 19 v . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . supply voltage, v cc ? ? 19 v . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . differential input voltage, v id (see note 2) 1.2 v . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . input voltage range, v i (any input) v cc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . input current, i i (each input) 1 ma . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . output current, i o 50 ma . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . total current into v cc+ 50 ma . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . total current out of v cc ? 50 ma . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . duration of short-circuit current at (or below) 25 c (see note 3) unlimited . . . . . . . . . . . . . . . . . . . . . . . . . . . . continuous total power dissipation see dissipation rating table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . operating free-air temperature range, t a : c suffix 0 c to 70 c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i suffix ? 40 c to 105 c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . m suffix ? 55 c to 125 c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . storage temperature range, t stg ? 65 c to 150 c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . case temperature for 60 seconds, t c : fk package 260 c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: d or p package 260 c . . . . . . . . . . . . . . . . lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: jg package 300 c . . . . . . . . . . . . . . . . . . . ? stresses beyond those listed under ?absolute maximum ratings? may cause permanent damage to the device. these are stress ratings only, a nd functional operation of the device at these or any other conditions beyond those indicated under ?recommended operating conditi ons? is not implied. exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. notes: 1. all voltage values, except differential voltages, are with respect to the midpoint between v cc + and v cc ? . 2. differential voltages are at in+ with respect to in ? . excessive current flows if a differential input voltage in excess of approximately 1.2 v is applied between the inputs unless some limiting resistance is used. 3. the output may be shorted to either supply. temperature and/or supply voltages must be limited to ensure that the maximum dissipation rating is not exceeded. dissipation rating table package t a 25 c power rating derating factor above t a = 25 c t a = 70 c power rating t a = 105 c power rating t a = 125 c power rating d 725 mw 5.8 mw/ c 464 mw 261 mw 145 mw fk 1375 mw 11.0 mw/ c 880 mw 495 mw 275 mw jg 1050 mw 8.4 mw/ c 672 mw 378 mw 210 mw p 1000 mw 8.0 mw/ c 640 mw 360 mw 200 mw recommended operating conditions c suffix i suffix m suffix unit min max min max min max unit supply voltage, v cc 4 19 4 19 4 19 v common mode input voltage v t a = 25 c ? 11 11 ? 11 11 ? 11 11 v common-mode input voltage, v ic t a = full range ? ? 10.5 10.5 ? 10.4 10.4 ? 10.2 10.2 v operating free-air temperature, t a 0 70 ? 40 105 ? 55 125 c ? full range is 0 c to 70 c for c-suffix devices, ? 40 c to 105 c for i-suffix devices, and ? 55 c to 125 c for m-suffix devices.
tle2027, tle2037, tle2027a, tle2037a, tle2027y, tle2037y excalibur low-noise high-speed precision operational amplifiers slos192c ? february 1997 ? revised april 2010 6 www.ti.com tle20x7c electrical characteristics at specified free-air temperature, v cc = 15 v (unless otherwise noted) parameter test conditions t ? tle20x7c tle20x7ac unit parameter test conditions t a ? min typ max min typ max unit v input offset voltage 25 c 20 100 10 25 v v io input offset voltage full range 145 70 v vio temperature coefficient of input offset voltage full range 0.4 1 0.2 1 v/ c input offset voltage long-term drift (see note 4) v ic = 0, r s = 50 25 c 0.006 1 0.006 1 v/mo i input offset current 25 c 6 90 6 90 na i io input offset current full range 150 150 na i input bias current 25 c 15 90 15 90 na i ib input bias current full range 150 150 na v common-mode input r 50 25 c ? 11 to 11 ? 13 to 13 ? 11 to 11 ? 13 to 13 v v icr common mode input voltage range r s = 50 full range ? 10.5 to 10.5 ? 10.5 to 10.5 v r 600 25 c 10.5 12.9 10.5 12.9 v maximum p ositive p eak r l = 600 full range 10 10 v v om + maximum positive peak output voltage swing r 2 k 25 c 12 13.2 12 13.2 v pgg r l = 2 k full range 11 11 r 600 25 c ? 10.5 ? 13 ? 10.5 ? 13 v maximum negative peak r l = 600 full range ? 10 ? 10 v v om ? maximum negative peak output voltage swing r 2 k 25 c ? 12 ? 13.5 ? 12 ? 13.5 v r l = 2 k full range ? 11 ? 11 v o = 11 v, r l = 2 k 25 c 5 45 10 45 v o = 10 v, r l = 2 k full range 2 4 a large-signal differential v 10 v r 1 k 25 c 3.5 38 8 38 v/ v a vd large signal differential voltage amplification v o = 10 v, r l = 1 k full range 1 2.5 v/ v v o = 10 v, 25 c 2 19 5 19 v o = 10 v , r l = 600 full range 0.5 2 c i input capacitance 25 c 8 8 pf z o open-loop output impedance i o = 0 25 c 50 50 cmrr common-mode re j ection v i c = v i c r min, 25 c 100 131 117 131 db cmrr common mode rejection ratio v ic = v icr min , r s = 50 full range 98 114 db k suppl y -volta g e re j ection v cc = 4 v to 18 v, r s = 50 25 c 94 144 110 144 db k svr supply voltage rejection ratio ( v cc / v io ) v cc = 4 v to 18 v, r s = 50 full range 92 106 db i supply current v 0 no load 25 c 3.8 5.3 3.8 5.3 ma i cc supply current v o = 0, no load full range 5.6 5.6 ma ? full range is 0 c to 70 c. note 4: typical values are based on the input offset voltage shift observed through 168 hours of operating life test at t a = 150 c extrapolated to t a = 25 c using the arrhenius equation and assuming an activation energy of 0.96 ev.
tle2027, tle2037, tle2027a, tle2037a, tle2027y, tle2037y excalibur low-noise high-speed precision operational amplifiers slos192c ? february 1997 ? revised april 2010 7 www.ti.com tle20x7c operating characteristics at specified free-air temperature, v cc = 15 v, t a = 25 c (unless otherwise specified) parameter test conditions tle20x7c tle20x7ac unit parameter test conditions min typ max min typ max unit r l = 2 k , c 100 pf tle2027 1.7 2.8 1.7 2.8 c l = 100 pf, see figure 1 tle2037 6 7.5 6 7.5 sr slew rate at unity gain r l = 2 k , c l = 100 p f, tle2027 1.2 1.2 v/ s c l = 100 pf , t a = 0 c to 70 c, see figure 1 tle2037 5 5 v equivalent input noise volt- r s = 20 , f = 10 hz 3.3 8 3.3 4.5 nv/ hz v n equivalent input noise volt age (see figure 2) r s = 20 , f = 1 khz 2.5 4.5 2.5 3.8 nv/ hz v n(pp) peak-to-peak equivalent in- put noise voltage f = 0.1 hz to 10 hz 50 250 50 130 nv i equivalent input noise cur- f = 10 hz 10 25 10 25 pa/ hz i n equivalent input noise cur rent f = 1 khz 0.8 1.8 0.8 1.8 pa/ hz thd total harmonic distortion v o = + 10 v, a vd = 1, see note 5 tle2027 < 0.002% < 0.002% thd total harmonic distortion v o = + 10 v, a vd = 5, see note 5 tle2037 < 0.002% < 0.002% b 1 unity-gain bandwidth (see figure 3) r l = 2 k , c l = 100 pf tle2027 9 (6) 13 9 (6) 13 mhz gbw gain bandwidth product r l = 2 k , c l = 100 pf tle2037 35 50 35 50 mhz b maximum output-swin g r 2 k tle2027 30 30 khz b om maximum output swing bandwidth r l = 2 k tle2037 80 80 khz phase margin at unity gain r l = 2 k , tle2027 55 55 m phase margin at unity gain (see figure 3) r l 2 k , c l = 100 pf tle2037 50 50 note 5: measured distortion of the source used in the analysis was 0.002%. note 6: this parameter is not production tested
tle2027, tle2037, tle2027a, tle2037a, tle2027y, tle2037y excalibur low-noise high-speed precision operational amplifiers slos192c ? february 1997 ? revised april 2010 8 www.ti.com tle20x7i electrical characteristics at specified free-air temperature, v cc = 15 v (unless otherwise noted) parameter test conditions t ? tle20x7i tle20x7ai unit parameter test conditions t a ? min typ max min typ max unit v input offset voltage 25 c 20 100 10 25 v v io input offset voltage full range 180 105 v vio temperature coefficient of input offset voltage full range 0.4 1 0.2 1 v/ c input offset voltage long-term drift (see note 4) v ic = 0, r s = 50 25 c 0.006 1 0.006 1 v/mo i input offset current 25 c 6 90 6 90 na i io input offset current full range 150 150 na i input bias current 25 c 15 90 15 90 na i ib input bias current full range 150 150 na v common-mode input r 50 25 c ? 11 to 11 ? 13 to 13 ? 11 to 11 ? 13 to 13 v v icr common mode input voltage range r s = 50 full range ? 10.4 to 10.4 ? 10.4 to 10.4 v r 600 25 c 10.5 12.9 10.5 12.9 v maximum p ositive p eak r l = 600 full range 10 10 v v om + maximum positive peak output voltage swing r 2 k 25 c 12 13.2 12 13.2 v pgg r l = 2 k full range 11 11 r 600 25 c ? 10.5 ? 13 ? 10.5 ? 13 v maximum negative peak r l = 600 full range ? 10 ? 10 v v om ? maximum negative peak output voltage swing r 2 k 25 c ? 12 ? 13.5 ? 12 ? 13.5 v r l = 2 k full range ? 11 ? 11 v o = 11 v, r l = 2 k 25 c 5 45 10 45 v o = 10 v, r l = 2 k full range 2 3.5 a large-signal differential v 10 v r 1 k 25 c 3.5 38 8 38 v/ v a vd large signal differential voltage amplification v o = 10 v, r l = 1 k full range 1 2.2 v/ v v 10 v r 600 25 c 2 19 5 19 v o = 10 v, r l = 600 full range 0.5 1.1 c i input capacitance 25 c 8 8 pf z o open-loop output impedance i o = 0 25 c 50 50 cmrr common-mode re j ection v i c = v i c r min, 25 c 100 131 117 131 db cmrr common mode rejection ratio v ic = v icr min , r s = 50 full range 96 113 db k suppl y -volta g e re j ection v cc = 4 v to 18 v, r s = 50 25 c 94 144 110 144 db k svr supply voltage rejection ratio ( v cc / v io ) v cc = 4 v to 18 v, r s = 50 full range 90 105 db i cc supply current v o 0 no load 25 c 3.8 5.3 3.8 5.3 ma i cc supply current v o = 0, no load full range 5.6 5.6 ma ? full range is ? 40 c to 105 c. note 4: typical values are based on the input offset voltage shift observed through 168 hours of operating life test at t a = 150 c extrapolated to t a = 25 c using the arrhenius equation and assuming an activation energy of 0.96 ev.
tle2027, tle2037, tle2027a, tle2037a, tle2027y, tle2037y excalibur low-noise high-speed precision operational amplifiers slos192c ? february 1997 ? revised april 2010 9 www.ti.com tle20x7i operating characteristics at specified free-air temperature, v cc = 15 v, t a = 25 c (unless otherwise specified) parameter test conditions tle20x7i tle20x7ai unit parameter test conditions min typ max min typ max unit r l = 2 k , c 100 pf tle2027 1.7 2.8 1.7 2.8 c l = 100 pf, see figure 1 tle2037 6 7.5 6 7.5 sr slew rate at unity gain r l = 2 k , c l = 100 p f, tle2027 1.1 1.1 v/ s c l = 100 pf , t a = ? 40 c to 85 c, see figure 1 tle2037 4.7 4.7 v equivalent input noise r s = 20 , f = 10 hz 3.3 8 3.3 4.5 nv/ hz v n equivalent input noise voltage (see figure 2) r s = 20 , f = 1 khz 2.5 4.5 2.5 3.8 nv/ hz v n(pp) peak-to-peak equivalent input noise voltage f = 0.1 hz to 10 hz 50 250 50 130 nv i equivalent input noise f = 10 hz 10 25 10 25 pa/ hz i n equivalent input noise current f = 1 khz 0.8 1,8 0.8 1.8 pa/ hz thd total harmonic distortion v o = + 10 v, a vd = 1, see note 5 tle2027 < 0.002% < 0.002% thd total harmonic distortion v o = + 10 v, a vd = 5, see note 5 tle2037 < 0.002% < 0.002% b 1 unity-gain bandwidth (see figure 3) r l = 2 k , c l = 100 pf tle2027 9 (6) 13 9 (6) 13 mhz gbw gain bandwidth product r l = 2 k , c l = 100 pf tle2037 35 50 35 50 mhz b maximum output-swin g r 2 k tle2027 30 30 khz b om maximum output swing bandwidth r l = 2 k tle2037 80 80 khz phase mar g in at unit y r l = 2 k , tle2027 55 55 m phase margin at unity gain (see figure 3) r l = 2 k , c l = 100 pf tle2037 50 50 note 5: measured distortion of the source used in the analysis was 0.002%. note 6: this parameter is not production tested.
tle2027, tle2037, tle2027a, tle2037a, tle2027y, tle2037y excalibur low-noise high-speed precision operational amplifiers slos192c ? february 1997 ? revised april 2010 10 www.ti.com tle20x7m electrical characteristics at specified free-air temperature, v cc = 15 v (unless otherwise noted) parameter test conditions t ? tle20x7m tle20x7am unit parameter test conditions t a ? min typ max min typ max unit v input offset voltage 25 c 20 100 10 25 v v io input offset voltage full range 200 105 v vio temperature coefficient of input offset voltage full range 0.4 1* 0.2 1* v/ c input offset voltage long-term drift (see note 4) v ic = 0, r s = 50 25 c 0.006 1* 0.006 1* v/mo i input offset current 25 c 6 90 6 90 na i io input offset current full range 150 150 na i input bias current 25 c 15 90 15 90 na i ib input bias current full range 150 150 na v common-mode input r 50 25 c ? 11 to 11 ? 13 to 13 ? 11 to 11 ? 13 to 13 v v icr common mode input voltage range r s = 50 full range ? 10.3 to 10.3 ? 10.4 to 10.4 v r 600 25 c 10.5 12.9 10.5 12.9 v maximum p ositive p eak r l = 600 full range 10 10 v v om + maximum positive peak output voltage swing r 2 k 25 c 12 13.2 12 13.2 v pgg r l = 2 k full range 11 11 r 600 25 c ? 10.5 ? 13 ? 10.5 ? 13 v maximum negative peak r l = 600 full range ? 10 ? 10 v v om ? maximum negative peak output voltage swing r 2 k 25 c ? 12 ? 13.5 ? 12 ? 13.5 v r l = 2 k full range ? 11 ? 11 v o = 11 v, r l = 2 k 25 c 5 45 10 45 l i l diff ti l v o = 10 v, r l = 2 k full range 2.5 3.5 a vd large-signal differential voltage amplification v 10 v r 1 k 25 c 3.5 38 8 38 v/ v a vd vo lt age amp lifi ca ti on v o = 10 v, r l = 1 k full range 1.8 2.2 v/ v v 10 v r 600 25 c 2 19 5 19 v o = 10 v, r l = 600 25 c 2 19 5 19 ci input capacitance 25 c 8 8 pf z o open-loop output impedance i o = 0 25 c 50 50 cmrr common-mode re j ection v i c = v i c r min, 25 c 100 131 117 131 db cmrr common mode rejection ratio v ic = v icr min , r s = 50 full range 96 113 db k suppl y -volta g e re j ection v cc = 4 v to 18 v, r s = 50 25 c 94 144 110 144 db k svr supply voltage rejection ratio ( v cc / v io ) v cc = 4 v to 18 v, r s = 50 full range 90 105 db i supply current v 0 no load 25 c 3.8 5.3 3.8 5.3 ma i cc supply current v o = 0, no load full range 5.6 5.6 ma * on products compliant to mil-prf-38535, this parameter is not production tested. ? full range is ? 55 c to 125 c. note 4: typical values are based on the input offset voltage shift observed through 168 hours of operating life test at t a = 150 c extrapolated to t a = 25 c using the arrhenius equation and assuming an activation energy of 0.96 ev.
tle2027, tle2037, tle2027a, tle2037a, tle2027y, tle2037y excalibur low-noise high-speed precision operational amplifiers slos192c ? february 1997 ? revised april 2010 11 www.ti.com tle20x7m operating characteristics at specified free-air temperature, v cc = 15 v, t a = 25 c (unless otherwise specified) parameter test conditions tle20x7m tle20x7am unit parameter test conditions min typ max min typ max unit r l = 2 k , c 100 pf tle2027 1.7 2.8 1.7 2.8 c l = 100 pf, see figure 1 tle2037 6* 7.5 6* 7.5 sr slew rate at unity gain r l = 2 k , c l = 100 p f, tle2027 1 1 v/ s c l = 100 pf , t a = ? 55 c to 125 c, see figure 1 tle2037 4.4* 4.4* v equivalent input noise r s = 20 , f = 10 hz 3.3 8* 3.3 8* nv/ hz v n equivalent input noise voltage (see figure 2) r s = 20 , f = 1 khz 2.5 4* 2.5 4* nv/ hz v n(pp) peak-to-peak equivalent input noise voltage f = 0.1 hz to 10 hz 225 375* 225 375* nv i equivalent input noise f = 10 hz 25 25 pa/ hz i n equivalent input noise current f = 1 khz 2.5 2.5 pa/ hz thd total harmonic distortion v o = + 10 v, a vd = 1, see note 5 tle2027 < 0.002% < 0.002% thd total harmonic distortion v o = + 10 v, a vd = 5, see note 5 tle2037 < 0.002% < 0.002% b unit y - g ain bandwidth r l = 2 k , tle2027 7* 13 9* 13 mhz b 1 unity gain bandwidth (see figure 3) r l = 2 k , c l = 100 pf tle2037 35 50 35 50 mhz b maximum output-swin g r 2 k tle2027 30 30 khz b om maximum output swing bandwidth r l = 2 k tle2037 80 80 khz phase margin at unity r l = 2 k , tle2027 55 55 m phase margin at unity gain (see figure 3) r l 2 k , c l = 100 pf tle2037 50 50 * on products compliant to mil-prf-38535, this parameter is not production tested. note 5: measured distortion of the source used in the analysis was 0.002%.
tle2027, tle2037, tle2027a, tle2037a, tle2027y, tle2037y excalibur low-noise high-speed precision operational amplifiers slos192c ? february 1997 ? revised april 2010 12 www.ti.com tle20x7y electrical characteristics, v cc = 15 v, t a = 25 c (unless otherwise noted) parameter test conditions tle20x7y unit parameter test conditions min typ max unit v io input offset voltage 20 v input offset voltage long-term drift (see note 4) v ic = 0, r s = 50 0.006 v/mo i io input offset current v ic = 0 , r s = 50 6 na i ib input bias current 15 na v icr common-mode input voltage range r s = 50 ? 13 to 13 v v maximum positive peak output voltage swing r l = 600 12.9 v v om + maximum positive peak output voltage swing r l = 2 k 13.2 v v maximum negative peak output voltage swing r l = 600 ? 13 v v om ? maximum negative peak output voltage swing r l = 2 k ? 13.5 v v o = 11 v, r l = 2 k 45 a vd large-signal differential voltage amplification v o = 10 v, r l = 1 k 38 v/ v a vd l arge-s i gna l diff erent i a l vo l tage amp lifi cat i on v o = 10 v, r l = 600 19 v/ v c i input capacitance 8 pf z o open-loop output impedance i o = 0 50 cmrr common-mode rejection ratio v ic = v icr min, r s = 50 131 db k svr supply-voltage rejection ratio ( v cc / v io ) v cc = 4 v to 18 v, r s = 50 144 db i cc supply current v o = 0, no load 3.8 ma note 4: typical values are based on the input offset voltage shift observed through 168 hours of operating life test at t a = 150 c extrapolated to t a = 25 c using the arrhenius equation and assuming an activation energy of 0.96 ev.
tle2027, tle2037, tle2027a, tle2037a, tle2027y, tle2037y excalibur low-noise high-speed precision operational amplifiers slos192c ? february 1997 ? revised april 2010 13 www.ti.com tle20x7y operating characteristics at specified free-air temperature, v cc = 15 v parameter test conditions tle20x7y unit parameter test conditions min typ max unit sr slew rate at unity gain r l = 2 k ,c l = 100 pf, tle2027 2.8 v/ s sr slew rate at unity gain r l = 2 k , c l = 100 pf , see figure 1 tle2037 7.5 v/ s v equivalent input noise voltage (see figure 2) r s = 20 , f = 10 hz 3.3 nv/ hz v n equivalent input noise voltage (see figure 2) r s = 20 , f = 1 khz 2.5 nv/ hz v n(pp) peak-to-peak equivalent input noise voltage f = 0.1 hz to 10 hz 50 nv i equivalent input noise current f = 10 hz 10 pa/ hz i n equivalent input noise current f = 1 khz 0.8 pa/ hz thd total harmonic distortion v o = + 10 v, a vd = 1, see note 5 tle2027 < 0.002% thd total harmonic distortion v o = + 10 v, a vd = 5, see note 5 tle2037 < 0.002% b unity gain bandwidth (see figure 3) r 2 k c 100 pf tle2027 13 mhz b 1 unity-gain bandwidth (see figure 3) r l = 2 k ,c l = 100 pf tle2037 50 mhz b maximum output swing bandwidth r 2 k tle2027 30 khz b om maximum output-swing bandwidth r l = 2 k tle2037 80 khz phase margin at unity gain (see figure 3) r 2 k c 100 pf tle2027 55 m phase margin at unity gain (see figure 3) r l = 2 k ,c l = 100 pf tle2037 50 note 5: measured distortion of the source used in the analysis was 0.002%.
tle2027, tle2037, tle2027a, tle2037a, tle2027y, tle2037y excalibur low-noise high-speed precision operational amplifiers slos192c ? february 1997 ? revised april 2010 14 www.ti.com parameter measurement information v o 20 20 2 k ? 15 v 15 v + ? r l = 2 k c l = 100 pf (see note a) v o ? 15 v v i + ? 15 v r f note a: c l includes fixture capacitance. r i figure 1. slew-rate test circuit figure 2. noise-voltage test circuit v o 2 k c l = 100 pf (see note a) 10 k 100 v i ? 15 v 15 v + ? v o 2 k ? 15 v 15 v ? + v i c l = 100 pf (see note a) notes: a. c l includes fixture capacitance. note a: c l includes fixture capacitance. b. for the tle2037 and tle2037a, a vd must be 5. r f r i figure 3. unity-gain bandwidth and figure 4. small-signal pulse- phase-margin test circuit (tle2027 only) response test circuit
tle2027, tle2037, tle2027a, tle2037a, tle2027y, tle2037y excalibur low-noise high-speed precision operational amplifiers slos192c ? february 1997 ? revised april 2010 15 www.ti.com typical values typical values presented in this data sheet represent the median (50% point) of device parametric performance. initial estimates of parameter distributions in the ongoing program of improving data sheets and supplying more information to our customers, texas instruments has added an estimate of not only the typical values but also the spread around these values. these are in the form of distribution bars that show the 95% (upper) points and the 5% (lower) points from the characterization of the initial wafer lots of this new device type (see figure 5). the distribution bars are shown at the points where data was actually collected. the 95% and 5% points are used instead of 3 sigma since some of the distributions are not true gaussian distributions. the number of units tested and the number of different wafer lots used are on all of the graphs where distribution bars are shown. as noted in figure 5, there were a total of 835 units from two wafer lots. in this case, there is a good estimate for the within-lot variability and a possibly poor estimate of the lot-to-lot variability. this is always the case on newly released products since there can only be data available from a few wafer lots. the distribution bars are not intended to replace the minimum and maximum limits in the electrical tables. each distribution bar represents 90% of the total units tested at a specific temperature. while 10% of the units tested fell outside any given distribution bar, this should not be interpreted to mean that the same individual devices fell outside every distribution bar. ? supply current ? ma cc i 4.5 5 4 3.5 3 2.5 t a ? free-air temperature ? c 150 125 100 75 50 25 0 ? 25 ? 50 ? 75 (5% of the devices fell below this point.) 5% point on the distribution bar and lower points on the distribution bar. 90% of the devices were within the upper (5% of the devices fell above this point.) 95% point on the distribution bar supply current vs free-air temperature ???????? ???????? ???????? ???????? v cc = 15 v v o = 0 no load sample size = 835 units from 2 water lots figure 5. sample graph with distribution bars
tle2027, tle2037, tle2027a, tle2037a, tle2027y, tle2037y excalibur low-noise high-speed precision operational amplifiers slos192c ? february 1997 ? revised april 2010 16 www.ti.com typical characteristics table of graphs figure v io input offset voltage distribution 6, 7 v io input offset voltage change vs time after power on 8, 9 i io input offset current vs free-air temperature 10 i input bias current vs free-air temperature 11 i ib input bias current vs vs free air temperature common-mode input voltage 11 12 i i input current vs differential input voltage 13 v o(pp) maximum peak-to-peak output voltage vs frequency 14, 15 v maximum (positive/ne g ative) peak output vs load resistance 16, 17 v om maximum (positive/negative) peak output voltage vs vs load resistance free-air temperature 16 , 17 18, 19 vs su pp l y volta g e 20 a large signal differential voltage amplification vs vs supply voltage load resistance 20 21 a vd large-signal differential voltage amplification vs vs load resistance frequency 21 22 ? 25 vs vs frequency free-air temperature 22 25 26 z o output impedance vs frequency 27 cmrr common-mode rejection ratio vs frequency 28 k svr supply-voltage rejection ratio vs frequency 29 vs su pp l y volta g e 30 , 31 i os short-circut output current vs vs supply voltage elapsed time 30 , 31 32, 33 i os short circut output current vs vs elapsed time free-air temperature 32 , 33 34, 35 i supply current vs suppl y volta g e 36 i cc supply current vs vs supply voltage free-air temperature 36 37 voltage follower pulse response small si g nal 38, 40 voltage-follower pulse response small signal large signal 38 , 40 39, 41 v n equivalent input noise voltage vs frequency 42 noise voltage (referred to input) over 10-second interval 43 b unity gain bandwidth vs supply voltage 44 b 1 unity-gain bandwidth vs vs supply voltage load capacitance 44 45 gain bandwidth product vs suppl y volta g e 46 gain bandwidth product vs vs supply voltage load capacitance 46 47 sr slew rate vs free-air temperature 48, 49 vs su pp l y volta g e 50 , 51 m phase mar g in vs vs supply voltage load capacitance 50 , 51 52, 53 m phase margin vs vs load capacitance free-air temperature 52 , 53 54, 55 phase shift vs frequency 22 ? 25
tle2027, tle2037, tle2027a, tle2037a, tle2027y, tle2037y excalibur low-noise high-speed precision operational amplifiers slos192c ? february 1997 ? revised april 2010 17 www.ti.com typical characteristics figure 6 percentage of amplifiers ? % v io ? input offset voltage ? v t a = 25 c v cc = +15 v 16 14 12 10 8 6 4 2 0 120 90 60 30 ? 30 ? 60 ? 90 ? 120 0 ???? d package ???????????? 1568 amplifiers tested from 2 wafer lots distribution input offset voltage figure 7 input offset voltage change vs time after power on 0 0 t ? time after power on ? s 10 20 30 40 50 60 2 4 6 8 10 12 avio ? change in input offset voltage ? v io v ??????????? ??????????? 50 amplifiers tested from 2 wafer lots v cc = 15 v t a = 25 c ???? ???? d package figure 8 t ? time after power on ? s input offset voltage change vs time after power on 6 5 4 3 2 1 0 0 20 40 60 80 100 120 140 160 180 avio ? change in input offset voltage ? v io v ??????????? ??????????? 50 amplifiers tested from 2 wafer lots v cc = 15 v t a = 25 c ???? ???? p package figure 9 0 iio ? input offset current ? na 5 10 15 20 25 30 150 125 100 75 50 25 0 ? 25 ? 50 t a ? free-air temperature ? c ? 75 input offset current ? vs free-air temperature io i v cc = 15 v v ic = 0 sample size = 833 units from 2 wafer lots ? data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various dev ices.
tle2027, tle2037, tle2027a, tle2037a, tle2027y, tle2037y excalibur low-noise high-speed precision operational amplifiers slos192c ? february 1997 ? revised april 2010 18 www.ti.com typical characteristics figure 10 input bias current ? vs free-air temperature ? 20 ? 75 iib ? input bias current ? na t a ? free-air temperature ? c ? 10 0 10 20 30 40 50 60 ? 50 ? 25 0 25 50 75 100 125 150 v cc = 15 v v ic = 0 sample size = 836 units from 2 wafer lots ib i figure 11 input bias current vs common-mode input voltage 0 ? 12 v ic ? common-mode input voltage ? v ? 8 ? 40 4 8 12 5 10 15 20 25 30 35 40 t a = 25 c v cc = 15 v iib ? input bias current ? na ib i figure 12 ii ? input current ? ma ? 1 ? 1.8 v id ? differential input voltage ? v ? 0.8 ? 0.6 ? 0.4 ? 0.2 0 0.2 0.4 0.6 0.8 1 ? 1.2 ? 0.6 0 0.6 1.2 1.8 input current vs differential input voltage i i v cc = 15 v v ic = 0 t a = 25 c figure 13 v o(pp) ? maximum peak-to-peak output voltage ? v t a = ? 55 c t a = 125 c 10 m 1 m 100 k 30 25 20 15 10 5 f ? frequency ? hz 10 k 0 ????? ????? ????? v cc = 15 v r l = 2 k tle2027 maximum peak-to-peak output voltage ? vs frequency ? data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various dev ices.
tle2027, tle2037, tle2027a, tle2037a, tle2027y, tle2037y excalibur low-noise high-speed precision operational amplifiers slos192c ? february 1997 ? revised april 2010 19 www.ti.com typical characteristics figure 14 vo(pp) ? maximum peak-to-peak output voltage ? v 0 10 k f ? frequency ? hz 5 10 15 20 25 30 100 k 1 m 100 m t a = ? 55 c 10 m v o(pp) ????? ????? r l = 2 k ????? ????? v cc = 15 v ???? ???? t a = 125 c tle2037 maximum peak-to-peak output voltage ? vs frequency figure 15 maximum positive peak output voltage vs load resistance 0 100 vom+ ? maximum positive peak output voltage ? v r l ? load resistance ? 2 4 6 8 10 12 14 1 k 10 k v om + v cc = 15 v t a = 25 c figure 16 0 100 vom ? ? maximum negative peak output voltage ? v r l ? load resistance ? ? 2 ? 4 ? 6 ? 8 ? 10 ? 12 ? 14 1 k 10 k maximum negative peak output voltage vs load resistance v om ? v cc = 15 v t a = 25 c figure 17 maximum positive peak output voltage ? vs free-air temperature 12.9 ? 75 t a ? free-air temperature ? c 13 13.1 13.2 13.3 13.4 13.5 ? 50 ? 25 0 25 50 75 100 125 150 vom+ ? maximum positive peak output voltage ? v v om + ????? ????? v cc = 15 v ????? ????? r l = 2 k ?????? ?????? from 2 wafer lots ??????? ??????? sample size = 832 units ? data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various dev ices.
tle2027, tle2037, tle2027a, tle2037a, tle2027y, tle2037y excalibur low-noise high-speed precision operational amplifiers slos192c ? february 1997 ? revised april 2010 20 www.ti.com typical characteristics figure 18 maximum negative peak output voltage ? vs free-air temperature ? 14 ? 75 t a ? free-air temperature ? c ? 13.8 ? 13.6 ? 13.4 ? 13.2 ? 13 ? 50 ? 25 0 25 50 75 100 125 150 ????? r l = 2 k ????? ????? v cc = 15 v vom ? ? maximum negative peak output voltage ? v v om ? ???????? ???????? sample size = 831 units ?????? ?????? from 2 wafer lots figure 19 large-signal differential voltage amplification vs supply voltage 0 0 ? v cc ? ? supply voltage ? v 50 4 8 12 16 20 10 20 30 40 r l = 2 k r l = 1 k r l = 600 ???? t a = 25 c avd ? large-signal differential a vd v v/ voltage amplification ? figure 20 10 0 50 100 200 400 1 k 4 k 10 k 2 k 40 30 20 r l ? load resistance ? t a = 25 c v cc = 15 v avd ? large-signal differential a vd v v/ voltage amplification ? large-signal differential voltage amplification vs load resistance ? data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various dev ices.
tle2027, tle2037, tle2027a, tle2037a, tle2027y, tle2037y excalibur low-noise high-speed precision operational amplifiers slos192c ? february 1997 ? revised april 2010 21 www.ti.com typical characteristics a vd phase shift v cc = 15 v r l = 2 k c l = 100 pf t a = 25 c phase shift 275 75 250 225 200 175 150 125 100 140 120 100 80 60 40 20 100 k 100 160 100 m f ? frequency ? hz 0 0.1 avd ? large-signal differential a vd voltage amplification ? db figure 21 tle2027 large-signal differential voltage amplification and phase shift vs frequency 0.1 0 f ? frequency ? mhz 100 m 160 100 100 k 20 40 60 80 100 120 140 100 125 150 175 200 225 250 75 275 ????? ????? phase shift ?? ?? a vd phase shift avd ? large-signal differential a vd voltage amplification ? db t a = 25 c c l = 100 pf v cc = 15 v r l = 2 k figure 22 tle2037 large-signal differential voltage amplification and phase shift vs frequency
tle2027, tle2037, tle2027a, tle2037a, tle2027y, tle2037y excalibur low-noise high-speed precision operational amplifiers slos192c ? february 1997 ? revised april 2010 22 www.ti.com typical characteristics 300 100 275 250 225 200 175 150 125 phase shift a vd phase shift 70 40 20 3 0 ? 3 ? 6 ? 9 ? 12 ? 15 6 100 f ? frequency ? mhz ? 18 10 ????? ????? ????? v cc = 15 v r l = 2 k c l = 100 pf t a = 25 c avd ? large-signal differential a vd voltage amplification ? db figure 23 tle2027 large-signal differential voltage amplification and phase shift vs frequency ? 5 ? 10 15 1 2 4 10 40 100 20 10 5 0 30 25 20 f ? frequency ? mhz phase shift 275 300 175 200 225 250 100 125 150 ????? phase shift ??? a vd avd ? large-signal differential a vd voltage amplification ? db t a = 25 c c l = 100 pf r l = 2 k v cc = 15 v figure 24 tle2037 large-signal differential voltage amplification and phase shift vs frequency
tle2027, tle2037, tle2027a, tle2037a, tle2027y, tle2037y excalibur low-noise high-speed precision operational amplifiers slos192c ? february 1997 ? revised april 2010 23 www.ti.com typical characteristics figure 25 ? 75 30 t a ? free-air temperature ? c 150 60 ? 50 ? 25 0 25 50 75 100 125 40 50 v cc = 15 v ????? ????? r l = 2 k ????? r l = 1 k large-signal differential voltage amplification ? vs free-air temperature avd ? large-signal differential a vd v v/ voltage amplification ? output impedance vs frequency figure 26 10 ? 100 zo ? output impedance ? f ? frequency ? hz 100 m 100 100 1 k 10 k 100 k 1 m 10 m ? 10 1 10 a vd = 100 see note a a vd = 10 z o v cc = 15 v t a = 25 c note a: for this curve, the tle2027 is a vd = 1 and the tle2037 is a vd = 5. 10 0 cmrr ? common-mode rejection ratio ? db f ? frequency ? hz 100 m 140 100 1 k 10 k 100 k 1 m 10 m 20 40 60 80 100 120 common-mode rejection ratio vs frequency ???? t a = 25 c ????? ????? v cc = 15 v figure 27 10 0 ? supply-voltage rejection ratio ? db f ? frequency ? hz 100 m 140 100 1 k 10 k 100 k 1 m 10 m 20 40 60 80 100 120 ???? k svr ? ??? ??? k svr + supply-voltage rejection ratio vs frequency ???? t a = 25 c ?????? v cc = 15 v svr k figure 28 ? data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various dev ices.
tle2027, tle2037, tle2027a, tle2037a, tle2027y, tle2037y excalibur low-noise high-speed precision operational amplifiers slos192c ? february 1997 ? revised april 2010 24 www.ti.com typical characteristics 0 ? 30 ios ? short-circuit output current ? ma ? 42 2 4 6 8 10 12 14 16 18 20 ? 32 ? 34 ? 36 ? 38 ? 40 short-circuit output current vs supply voltage ? v cc ? ? supply voltage ? v v id = 100 mv v o = 0 t a = 25 c ???? p package os i figure 29 short-circuit output current vs supply voltage 0 30 44 2 4 6 8 10 12 14 16 18 20 32 34 36 38 40 42 v id = ? 100 mv v o = 0 t a = 25 c p package ios ? short-circuit output current ? ma os i ? v cc ? ? supply voltage ? v figure 30 0 ? 35 t ? elasped time ? s 180 ? 45 30 60 90 120 150 ? 37 ? 39 ? 41 ? 43 short-circuit output current vs elapsed time ???? p package t a = 25 c v o = 0 v id = 100 mv v cc = 15 v ios ? short-circuit output current ? ma os i figure 31 short-circuit output current vs elapsed time 0 34 t ? elasped time ? s 180 44 30 60 90 120 150 36 38 40 42 ios ? short-circuit output current ? ma os i ????? p package t a = 25 c v o = 0 v id = 100 mv v cc = 15 v figure 32
tle2027, tle2037, tle2027a, tle2037a, tle2027y, tle2037y excalibur low-noise high-speed precision operational amplifiers slos192c ? february 1997 ? revised april 2010 25 www.ti.com typical characteristics ? 75 ? 24 t a ? free-air temperature ? c 150 ? 48 ? 50 ? 25 0 25 50 75 100 125 ? 28 ? 32 ? 36 ? 40 ? 44 short-circuit output current ? vs free-air temperature ios ? short-circuit output current ? ma os i v cc = 15 v v id = 100 mv v o = 0 p package figure 33 26 t a ? free-air temperature ? c 46 30 34 38 42 125 100 75 50 25 0 ? 25 ? 50 150 ? 75 short-circuit output current ? vs free-air temperature ios ? short-circuit output current ? ma os i v cc = 15 v v id = ? 100 mv v o = 0 p package figure 34 0 0 icc ? supply current ? ma ? v cc ? ? supply voltage ? v 6 2 4 6 8 10 12 14 16 18 20 1 2 3 4 5 supply current ? vs supply voltage cc i v o = 0 no load ???? t a = 125 c ???? ???? t a = 25 c ???? ???? t a = ? 55 c figure 35 ? 75 2.5 t a ? free-air temperature ? c 150 5 ? 50 ? 25 02550 75 100 125 3 3.5 4 4.5 supply current ? vs free-air temperature icc ? supply current ? ma cc i v cc = 15 v v o = 0 no load sample size = 836 units from 2 wafer lots figure 36 ? data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various dev ices.
tle2027, tle2037, tle2027a, tle2037a, tle2027y, tle2037y excalibur low-noise high-speed precision operational amplifiers slos192c ? february 1997 ? revised april 2010 26 www.ti.com typical characteristics figure 37 v o ? output voltage ? mv 50 0 ? 50 800 600 400 200 0 100 1000 t ? time ? ns ? 100 ????? ????? ????? ????? v cc = 15 v r l = 2 k c l = 100 pf t a = 25 c see figure 4 tle2027 voltage-follower small-signal pulse response figure 38 t ? time ? s 25 0 5 10 15 20 10 5 0 ? 5 ? 10 15 ? 15 ????? ????? ????? ????? v cc = 15 v r l = 2 k c l = 100 pf t a = 25 c see figure 1 v o ? output voltage ? v tle2027 voltage-follower large-signal pulse response t a = 25 c see figure 4 v cc = 15 v a vd = 5 r l = 2 k c l = 100 pf 50 0 ? 50 300 200 100 0 100 400 t ? time ? ns ? 100 vo ? output voltage ? mv v o figure 39 tle2037 voltage-follower small-signal pulse response ? 15 15 ? 10 ? 5 0 5 10 t a = 25 c c l = 100 pf r l = 2 k a vd = 5 ?????? ?????? v cc = 15 v 8 6 4 2 010 t ? time ? s vo ? output voltage ? v v o ????? ????? see figure 1 figure 40 tle2037 voltage-follower large-signal pulse response
tle2027, tle2037, tle2027a, tle2037a, tle2027y, tle2037y excalibur low-noise high-speed precision operational amplifiers slos192c ? february 1997 ? revised april 2010 27 www.ti.com typical characteristics 1 0 vn ? equivalent input noise voltage ? nvhz f ? frequency ? hz 100 k 10 10 100 1 k 10 k 2 4 6 8 equivalent input noise voltage vs frequency v cc = 15 v r s = 20 t a = 25 c see figure 2 sample size = 100 units from 2 wafer lots v n nv/ hz figure 41 noise voltage (referred to input) over a 10-second interval 0 ? 50 noise voltage ? nv t ? time ? s 10 50 24 6 8 ? 40 ? 30 ? 20 ? 10 0 10 20 30 40 v cc = 15 v f = 0.1 to 10 hz t a = 25 c figure 42 figure 43 20 b 1 ? unity-gain bandwidth ? mhz 18 16 14 12 20 18 16 14 12 10 8 6 4 222 | v cc | ? supply voltage ? v 10 0 r l = 2 k c l = 100 pf t a = 25 c see figure 3 tle2027 unity-gain bandwidth vs supply voltage figure 44 0 48 ? v cc ? ? supply voltage ? v 52 2 46 8 10 12 14 16 18 20 49 50 51 r l = 2 k c l = 100 pf t a = 25 c f = 100 khz gain-bandwidth product ? mhz tle2037 gain-bandwidth product vs supply voltage
tle2027, tle2037, tle2027a, tle2037a, tle2027y, tle2037y excalibur low-noise high-speed precision operational amplifiers slos192c ? february 1997 ? revised april 2010 28 www.ti.com typical characteristics figure 45 v cc = 15 v r l = 2 k t a = 25 c see figure 3 1000 12 8 4 16 10000 c l ? load capacitance ? pf 0 100 b 1 ? unity-gain bandwidth ? mhz tle2027 unity-gain bandwidth vs load capacitance 100 48 gain-bandwidth product ? mhz c l ? load capacitance ? pf 10000 52 49 50 51 1000 t a = 25 c r l = 2 k v cc = 15 v figure 46 tle2037 gain-bandwidth product vs load capacitance figure 47 ????? ????? ????? ????? v cc = 15 v a vd = 1 r l = 2 k c l = 100 pf see figure 1 2.8 2.6 2.4 2.2 125 100 75 50 25 0 ? 25 ? 50 3 150 t a ? free-air temperature ? c sr ? slew rate ? v/ s 2 ? 75 tle2027 slew rate ? vs free-air temperature figure 48 ? 75 5 t a ? free-air temperature ? c 150 10 ? 50 ? 25 0 25 50 75 100 125 6 7 8 9 s a vd = 5 r l = 2 k c l = 100 pf see figure 1 sr ? slew rate ? v/ ?????? ?????? v cc = 15 v tle2037 slew rate ? vs free-air temperature ? data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various dev ices.
tle2027, tle2037, tle2027a, tle2037a, tle2027y, tle2037y excalibur low-noise high-speed precision operational amplifiers slos192c ? february 1997 ? revised april 2010 29 www.ti.com typical characteristics figure 49 56 54 52 50 48 46 44 20 18 16 14 12 10 8 6 4 2 58 22 | v cc | ? supply voltage ? v ? phase margin 42 0 ????? ????? ????? ????? r l = 2 k c l = 100 pf t a = 25 c see figure 3 m tle2027 phase margin vs supply voltage figure 50 0 m ? v cc ? ? supply voltage ? v 2 46 8 10 12 14 16 18 20 38 40 42 44 46 48 50 52 t a = 25 c c l = 100 pf a vd = 5 r l = 2 k ? phase margin tle2037 phase margin vs supply voltage figure 51 1000 40 20 60 c l ? load capacitance ? pf 0 100 ? phase margin m tle2027 phase margin vs load capacitance ????? ????? ????? ????? v cc = 15 v r l = 2 k t a = 25 c see figure 3 10 30 50 figure 52 100 0 c l ? load capacitance ? pf 10000 1000 10 20 30 40 50 60 v cc = 15 v r l = 2 k t a = 25 c m ? phase margin tle2037 phase margin vs load capacitance
? data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various dev ices. tle2027, tle2037, tle2027a, tle2037a, tle2027y, tle2037y excalibur low-noise high-speed precision operational amplifiers slos192c ? february 1997 ? revised april 2010 30 www.ti.com typical characteristics figure 53 ? phase margin m 60 55 50 45 40 125 100 75 50 25 0 ? 25 ? 50 65 150 t a ? free-air temperature ? c 35 ? 75 ????? ????? ????? v cc = 15 v r l = 2 k t a = 25 c see figure 3 tle2027 phase margin ? vs free-air temperature figure 54 ? 75 45 t a ? free-air temperature ? c 150 ? 50 ? 25 0 25 50 75 100 125 49 51 53 55 47 c l = 100 pf r l = 2 k a vd = 5 v cc = 15 v m ? phase margin tle2037 phase margin ? vs free-air temperature
tle2027, tle2037, tle2027a, tle2037a, tle2027y, tle2037y excalibur low-noise high-speed precision operational amplifiers slos192c ? february 1997 ? revised april 2010 31 www.ti.com application information input offset voltage nulling the tle2027 and tle2037 series offers external null pins that can be used to further reduce the input offset voltage. the circuits of figure 55 can be connected as shown if the feature is desired. if external nulling is not needed, the null pins may be left disconnected. 4.7 k 1 k v cc + out in ? in + v cc ? + ? 4.7 k ? + v cc ? out v cc + 10 k in ? in + (a) standard adjustment (b) adjustment with improved sensitivity figure 55. input offset voltage nulling circuits voltage-follower applications the tle2027 circuitry includes input-protection diodes to limit the voltage across the input transistors; however, no provision is made in the circuit to limit the current if these diodes are forward biased. this condition can occur when the device is operated in the voltage-follower configuration and driven with a fast, large-signal pulse. it is recommended that a feedback resistor be used to limit the current to a maximum of 1 ma to prevent degradation of the device. also, this feedback resistor forms a pole with the input capacitance of the device. for feedback resistor values greater than 10 k , this pole degrades the amplifier phase margin. this problem can be alleviated by adding a capacitor (20 pf to 50 pf) in parallel with the feedback resistor (see figure 56). r f i f 1 ma ? + v i v o v cc ? v cc c f = 20 to 50 pf figure 56. voltage follower
tle2027, tle2037, tle2027a, tle2037a, tle2027y, tle2037y excalibur low-noise high-speed precision operational amplifiers slos192c ? february 1997 ? revised april 2010 32 www.ti.com application information macromodel information macromodel information provided was derived using microsim parts ? , the model generation software used with microsim pspice ? . the boyle macromodel (see note 6) and subcircuit in figure 57, figure 58, and figure 59 were generated using the tle20x7 typical electrical and operating characteristics at 25 c. using this information, output simulations of the following key parameters can be generated to a tolerance of 20% (in most cases): ? maximum positive output voltage swing ? maximum negative output voltage swing ? slew rate ? quiescent power dissipation ? input bias current ? open-loop voltage amplification ? gain-bandwidth product ? common-mode rejection ratio ? phase margin ? dc output resistance ? ac output resistance ? short-circuit output current limit note 6: g. r. boyle, b. m. cohn, d. o. pederson, and j. e. solomon, ?macromodeling of integrated circuit operational amplifiers?, ieee journa l of solid-state circuits, sc-9, 353 (1974). 8 ro2 7 12 v cc + in + in ? v cc ? 1 2 dp rp 11 rc1 c1 rc2 q2 q1 13 14 3 re1 re2 4 lee ve ? + 54 10 ree cee 53 vc + ? r2 6 gcm ga de dc vb 9 + ? egnd 99 + ? fb c2 vlim + ? ro1 5 out 90 hlim + dip ? 91 92 dln vip vin + ? + ? figure 57. boyle macromodel pspice and parts are trademarks of microsim corporation.
tle2027, tle2037, tle2027a, tle2037a, tle2027y, tle2037y excalibur low-noise high-speed precision operational amplifiers slos192c ? february 1997 ? revised april 2010 33 www.ti.com application information macromodel information (continued) .subckt tle2027 1 2 3 4 5 * c1 11 12 4.003e-12 c2 6 7 20.00e-12 dc 5 53 dz de 54 5 dz dlp 90 91 dz dln 92 90 dx dp 4 3 dz egnd 99 0 poly(2) (3,0) (4,0) 0 5 .5 fb 7 99 poly(5) vb vc ve vlp vln 0 954.8e6 ? 1e9 1e9 1e9 ? 1e9 ga 6 0 11 12 2.062e-3 gcm 0 6 10 99 531.3e-12 iee 10 4 dc 56.01e-6 hlim 90 0 vlim 1k q1 11 2 13 qx figure 58. tle2027 macromodel subcircuit q2 12 1 14 qx r2 6 9 100.0e3 rc1 3 11 530.5 rc2 3 12 530.5 re1 13 10 ? 393.2 re2 14 10 ? 393.2 ree 10 99 3.571e6 ro1 8 5 25 ro2 7 99 25 rp 3 4 8.013e3 vb 9 0 dc 0 vc 3 53 dc 2.400 ve 54 4 dc 2.100 vlim 7 8 dc 0 vlp 91 0 dc 40 vln 0 92 dc 40 .modeldx d(is=800.0e-18) .modelqx npn(is=800.0e-18 bf=7.000e3) .ends .subckt tle2037 1 2 3 4 5 * c1 11 12 4.003e ? 12 c2 6 7 7.500e ? 12 dc 5 53 dz de 54 5 dz dlp 90 91 dz dln 92 90 dx dp 4 3 dz egnd 99 0 poly(2) (3,0) (4,0) 0 .5 .5 fb 7 99 poly(5) vb vc ve vip vln 0 923.4e6 a800e6 800e6 800e6 a800e6 ga 6 0 11 12 2.121e ? 3 gcm 0 6 10 99 597.7e ? 12 iee 10 4 dc 56.26e ? 6 hlim 90 0 vlim 1k q1 11 2 13 qx figure 59. tle2037 macromodel subcircuit q2 12 1 14 qz r2 6 9 100.0e3 rc1 3 11 471.5 rc2 3 12 471.5 re1 13 10 a448 re2 14 10 a448 ree 10 99 3.555e6 ro1 8 5 25 ro2 7 99 25 rp 3 4 8.013e3 vb 9 0 dc 0 vc 3 53 dc 2.400 ve 54 4 dc 2.100 vlim 7 8 dc 0 vlp 91 0 dc 40 vln 0 92 dc 40 .model dxd(is=800.0e ? 18) .model qxnpn(is=800.0e ? 18 bf=7.031e3) .ends
tle2027, tle2037, tle2027a, tle2037a, tle2027y, tle2037y excalibur low-noise high-speed precision operational amplifiers slos192c ? february 1997 ? revised april 2010 34 www.ti.com revision history changes from revision b (october 2006) to revision c ? changed values of v n , v n(pp) , and i n . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . 11
package option addendum www.ti.com 15-apr-2017 addendum-page 1 packaging information orderable device status (1) package type package drawing pins package qty eco plan (2) lead/ball finish (6) msl peak temp (3) op temp (c) device marking (4/5) samples 5962-9089601m2a active lccc fk 20 1 tbd post-plate n / a for pkg type -55 to 125 5962- 9089601m2a tle2027mfkb 5962-9089601mpa active cdip jg 8 1 tbd a42 n / a for pkg type -55 to 125 9089601mpa tle2027m 5962-9089603q2a active lccc fk 20 1 tbd post-plate n / a for pkg type -55 to 125 5962- 9089603q2a tle2027amfkb 5962-9089603qpa active cdip jg 8 1 tbd a42 n / a for pkg type -55 to 125 9089603qpa tle2027am tle2027amd active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -55 to 125 2027am tle2027amdg4 active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim 2027am tle2027amfkb active lccc fk 20 1 tbd post-plate n / a for pkg type -55 to 125 5962- 9089603q2a tle2027amfkb tle2027amjg active cdip jg 8 1 tbd a42 n / a for pkg type -55 to 125 tle2027 amjg tle2027amjgb active cdip jg 8 1 tbd a42 n / a for pkg type -55 to 125 9089603qpa tle2027am tle2027cd active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim 2027c tle2027cdg4 active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim 2027c tle2027cdr active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim 0 to 70 2027c tle2027id active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim 2027i tle2027idg4 active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim 2027i tle2027idr active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim 2027i tle2027idrg4 active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim 2027i
package option addendum www.ti.com 15-apr-2017 addendum-page 2 orderable device status (1) package type package drawing pins package qty eco plan (2) lead/ball finish (6) msl peak temp (3) op temp (c) device marking (4/5) samples tle2027md active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -55 to 125 2027m tle2027mfkb active lccc fk 20 1 tbd post-plate n / a for pkg type -55 to 125 5962- 9089601m2a tle2027mfkb tle2027mjg active cdip jg 8 1 tbd a42 n / a for pkg type -55 to 125 tle2027mjg tle2027mjgb active cdip jg 8 1 tbd a42 n / a for pkg type -55 to 125 9089601mpa tle2027m tle2037amd active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -55 to 125 2037am tle2037amdg4 active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -55 to 125 2037am tle2037cd active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim 2037c TLE2037CDG4 active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim 2037c tle2037cdr active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim 2037c tle2037id active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim 2037i tle2037idg4 active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim 2037i tle2037idr active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim 2037i tle2037idrg4 active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim 2037i tle2037md active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -55 to 125 2037m (1) the marketing status values are defined as follows: active: product device recommended for new designs. lifebuy: ti has announced that the device will be discontinued, and a lifetime-buy period is in effect. nrnd: not recommended for new designs. device is in production to support existing customers, but ti does not recommend using this part in a new design. preview: device has been announced but is not in production. samples may or may not be available. obsolete: ti has discontinued the production of the device.
package option addendum www.ti.com 15-apr-2017 addendum-page 3 (2) eco plan - the planned eco-friendly classification: pb-free (rohs), pb-free (rohs exempt), or green (rohs & no sb/br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. tbd: the pb-free/green conversion plan has not been defined. pb-free (rohs): ti's terms "lead-free" or "pb-free" mean semiconductor products that are compatible with the current rohs requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. where designed to be soldered at high temperatures, ti pb-free products are suitable for use in specified lead-free processes. pb-free (rohs exempt): this component has a rohs exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. the component is otherwise considered pb-free (rohs compatible) as defined above. green (rohs & no sb/br): ti defines "green" to mean pb-free (rohs compatible), and free of bromine (br) and antimony (sb) based flame retardants (br or sb do not exceed 0.1% by weight in homogeneous material) (3) msl, peak temp. - the moisture sensitivity level rating according to the jedec industry standard classifications, and peak solder temperature. (4) there may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) multiple device markings will be inside parentheses. only one device marking contained in parentheses and separated by a "~" will appear on a device. if a line is indented then it is a continuation of the previous line and the two combined represent the entire device marking for that device. (6) lead/ball finish - orderable devices may have multiple material finish options. finish options are separated by a vertical ruled line. lead/ball finish values may wrap to two lines if the finish value exceeds the maximum column width. important information and disclaimer: the information provided on this page represents ti's knowledge and belief as of the date that it is provided. ti bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. efforts are underway to better integrate information from third parties. ti has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. ti and ti suppliers consider certain information to be proprietary, and thus cas numbers and other limited information may not be available for release. in no event shall ti's liability arising out of such information exceed the total purchase price of the ti part(s) at issue in this document sold by ti to customer on an annual basis. other qualified versions of tle2027, tle2027m, tle2037a : ? catalog: tle2027 ? automotive: tle2037a-q1 ? enhanced product: tle2027-ep , tle2027-ep ? military: tle2027m note: qualified version definitions:
package option addendum www.ti.com 15-apr-2017 addendum-page 4 ? catalog - ti's standard catalog product ? automotive - q100 devices qualified for high-reliability automotive applications targeting zero defects ? enhanced product - supports defense, aerospace and medical applications ? military - qml certified for military and defense applications
tape and reel information *all dimensions are nominal device package type package drawing pins spq reel diameter (mm) reel width w1 (mm) a0 (mm) b0 (mm) k0 (mm) p1 (mm) w (mm) pin1 quadrant tle2027cdr soic d 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 q1 tle2027idr soic d 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 q1 tle2037cdr soic d 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 q1 tle2037idr soic d 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 q1 package materials information www.ti.com 23-sep-2010 pack materials-page 1
*all dimensions are nominal device package type package drawing pins spq length (mm) width (mm) height (mm) tle2027cdr soic d 8 2500 340.5 338.1 20.6 tle2027idr soic d 8 2500 340.5 338.1 20.6 tle2037cdr soic d 8 2500 340.5 338.1 20.6 tle2037idr soic d 8 2500 340.5 338.1 20.6 package materials information www.ti.com 23-sep-2010 pack materials-page 2

mechanical data mcer001a january 1995 revised january 1997 post office box 655303 ? dallas, texas 75265 jg (r-gdip-t8) ceramic dual-in-line 0.310 (7,87) 0.290 (7,37) 0.014 (0,36) 0.008 (0,20) seating plane 4040107/c 08/96 5 4 0.065 (1,65) 0.045 (1,14) 8 1 0.020 (0,51) min 0.400 (10,16) 0.355 (9,00) 0.015 (0,38) 0.023 (0,58) 0.063 (1,60) 0.015 (0,38) 0.200 (5,08) max 0.130 (3,30) min 0.245 (6,22) 0.280 (7,11) 0.100 (2,54) 0 15 notes: a. all linear dimensions are in inches (millimeters). b. this drawing is subject to change without notice. c. this package can be hermetically sealed with a ceramic lid using glass frit. d. index point is provided on cap for terminal identification. e. falls within mil std 1835 gdip1-t8
important notice texas instruments incorporated (ti) reserves the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per jesd46, latest issue, and to discontinue any product or service per jesd48, latest issue. buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. ti ? s published terms of sale for semiconductor products ( http://www.ti.com/sc/docs/stdterms.htm ) apply to the sale of packaged integrated circuit products that ti has qualified and released to market. additional terms may apply to the use or sale of other types of ti products and services. reproduction of significant portions of ti information in ti data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. ti is not responsible or liable for such reproduced documentation. information of third parties may be subject to additional restrictions. resale of ti products or services with statements different from or beyond the parameters stated by ti for that product or service voids all express and any implied warranties for the associated ti product or service and is an unfair and deceptive business practice. ti is not responsible or liable for any such statements. buyers and others who are developing systems that incorporate ti products (collectively, ? designers ? ) understand and agree that designers remain responsible for using their independent analysis, evaluation and judgment in designing their applications and that designers have full and exclusive responsibility to assure the safety of designers ' applications and compliance of their applications (and of all ti products used in or for designers ? applications) with all applicable regulations, laws and other applicable requirements. designer represents that, with respect to their applications, designer has all the necessary expertise to create and implement safeguards that (1) anticipate dangerous consequences of failures, (2) monitor failures and their consequences, and (3) lessen the likelihood of failures that might cause harm and take appropriate actions. designer agrees that prior to using or distributing any applications that include ti products, designer will thoroughly test such applications and the functionality of such ti products as used in such applications. ti ? s provision of technical, application or other design advice, quality characterization, reliability data or other services or information, including, but not limited to, reference designs and materials relating to evaluation modules, (collectively, ? ti resources ? ) are intended to assist designers who are developing applications that incorporate ti products; by downloading, accessing or using ti resources in any way, designer (individually or, if designer is acting on behalf of a company, designer ? s company) agrees to use any particular ti resource solely for this purpose and subject to the terms of this notice. ti ? s provision of ti resources does not expand or otherwise alter ti ? s applicable published warranties or warranty disclaimers for ti products, and no additional obligations or liabilities arise from ti providing such ti resources. ti reserves the right to make corrections, enhancements, improvements and other changes to its ti resources. ti has not conducted any testing other than that specifically described in the published documentation for a particular ti resource. designer is authorized to use, copy and modify any individual ti resource only in connection with the development of applications that include the ti product(s) identified in such ti resource. no other license, express or implied, by estoppel or otherwise to any other ti intellectual property right, and no license to any technology or intellectual property right of ti or any third party is granted herein, including but not limited to any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which ti products or services are used. information regarding or referencing third-party products or services does not constitute a license to use such products or services, or a warranty or endorsement thereof. use of ti resources may require a license from a third party under the patents or other intellectual property of the third party, or a license from ti under the patents or other intellectual property of ti. ti resources are provided ? as is ? and with all faults. ti disclaims all other warranties or representations, express or implied, regarding resources or use thereof, including but not limited to accuracy or completeness, title, any epidemic failure warranty and any implied warranties of merchantability, fitness for a particular purpose, and non-infringement of any third party intellectual property rights. ti shall not be liable for and shall not defend or indemnify designer against any claim, including but not limited to any infringement claim that relates to or is based on any combination of products even if described in ti resources or otherwise. in no event shall ti be liable for any actual, direct, special, collateral, indirect, punitive, incidental, consequential or exemplary damages in connection with or arising out of ti resources or use thereof, and regardless of whether ti has been advised of the possibility of such damages. unless ti has explicitly designated an individual product as meeting the requirements of a particular industry standard (e.g., iso/ts 16949 and iso 26262), ti is not responsible for any failure to meet such industry standard requirements. where ti specifically promotes products as facilitating functional safety or as compliant with industry functional safety standards, such products are intended to help enable customers to design and create their own applications that meet applicable functional safety standards and requirements. using products in an application does not by itself establish any safety features in the application. designers must ensure compliance with safety-related requirements and standards applicable to their applications. designer may not use any ti products in life-critical medical equipment unless authorized officers of the parties have executed a special contract specifically governing such use. life-critical medical equipment is medical equipment where failure of such equipment would cause serious bodily injury or death (e.g., life support, pacemakers, defibrillators, heart pumps, neurostimulators, and implantables). such equipment includes, without limitation, all medical devices identified by the u.s. food and drug administration as class iii devices and equivalent classifications outside the u.s. ti may expressly designate certain products as completing a particular qualification (e.g., q100, military grade, or enhanced product). designers agree that it has the necessary expertise to select the product with the appropriate qualification designation for their applications and that proper product selection is at designers ? own risk. designers are solely responsible for compliance with all legal and regulatory requirements in connection with such selection. designer will fully indemnify ti and its representatives against any damages, costs, losses, and/or liabilities arising out of designer ? s non- compliance with the terms and provisions of this notice. mailing address: texas instruments, post office box 655303, dallas, texas 75265 copyright ? 2017, texas instruments incorporated

▲Up To Search▲

Price & Availability of TLE2037CDG4

	To Download TLE2037CDG4 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .